An electrospun three-layer nanofibrous membrane-based in situ gel separator for efficient lithium-organic batteries.

An in situ gel separator based on an electrospun three-layer nanofibrous membrane (PSE11-Gel) is developed for high-performance lithium-organic batteries (LOBs). The highly efficient shuttle effect inhibition of organic cathode molecules or lithiated intermediates has been demonstrated for PSE11-Gel to realize high-capacity stable LOBs.

Flexible optical tactile sensor based on a liquid-membrane lens structure.

Based on the liquid lens focus mechanism, a novel, to the best of our knowledge, optical tactile sensor is designed by taking advantage of the structure simplicity, fast response, and environmental immunity. The design of the tactile sensing mechanism used the liquid-membrane lens structure. To integrate the tactile sensing system, we designed a data acquisition circuit unit. A performance test platform was built, and performance testing and two application demonstrations were conducted. The experiment's result showed that the linear fitting degree was greater than 0.988, the load response time was 0.078 s, the target mass was accurately measured, the maximum error was less than 0.02 N, and the fine adjustment of the LED light intensity was achieved.

Over-expression of RRM2 predicts adverse prognosis correlated with immune infiltrates: A potential biomarker for hepatocellular carcinoma.

Background: Ribonucleotide reductase regulatory subunit M2 (RRM2) has been reported to be an oncogene in some malignant tumors, such as lung adenocarcinoma, oral squamous cell carcinoma, glioblastoma, and breast cancer. However, the clinical significance of RRM2 in hepatocellular carcinoma has been less studied. The aim of this study was to assess the importance of RRM2 in hepatocellular carcinoma (HCC) based on the Cancer Genome Atlas (TCGA) database. Methods: The RRM2 expression levels and clinical features were downloaded from the TCGA database. Immunohistochemistry results between tumor tissues and normal tissues were downloaded from the Proteinatlas database. Meanwhile, the expression levels of RRM2 in tumor and paraneoplastic tissues were further verified by qRT-PCR and Western Blotting. Gene Ontology (GO)/Kyoto Encyclopedia of Genes and Genomes (KEGG) and protein-protein-interactions (PPI) network were constructed to analyze RRM2-related downstream molecules. In addition, RRM2 expression-related pathways performed by gene set enrichment analysis (GSEA). Association analysis of RRM2 gene expression and immune infiltration was performed by single-sample GSEA (ssGSEA). Results: The RRM2 expression level in tumor tissues was higher than normal tissues (P <0.001). The elevated expression of RRM2 in HCC was significantly correlated with T stage (P <0.05), pathologic stage (P <0.05), tumor status (P <0.05), histologic grade (P<0.001), and AFP (P <0.001). HCC with higher RRM2 expression was positively associated with worse OS (overall survival), PFS (progression-free survival), and DSS (disease-specific survival). In the univariate analysis, the expression of RRM2, T stage, M stage, pathologic stage, and tumor status were negatively correlated with OS (P <0.05). Further analysis using multivariate Cox regression showed that tumor status (P<0.01) and RRM2 expression (P<0.05) were independent prognostic factors of OS in HCC. GO/KEGG analysis showed that the critical biological process (chromosome condensation and p53 signaling pathway) might be the possible function mechanism in promoting HCC. Moreover, GSEA showed that several pathways were enriched in RRM2 high-expression samples, including PD-1 signaling, cell cycle, P27 pathway, and T cell receptor signaling pathway. RRM2 was significantly correlated with the infiltration level of CD8 T cells, Cytotoxic cells, DCs, Neutrophils, NK cells, and T helper cells (P <0.05). Conclusion: Over-expression of RRM2 predict adverse prognosis and is correlated with immune infiltrates in HCC. RRM2 may be a significant molecular biomarker for HCC diagnosis and prognosis.

Platelet-rich plasma-loaded bioactive chitosan@sodium alginate@gelatin shell-core fibrous hydrogels with enhanced sustained release of growth factors for diabetic foot ulcer healing.

The ability of autologous platelet-rich plasma (PRP) gel to promote rapid wound healing without immunological rejection has opened new avenues for the treatment of diabetic foot wounds. However, PRP gel still suffers from the quick release of growth factors (GFs) and requires frequent administration, thus resulting in decreased wound healing efficiency, higher cost as well as greater pain and suffering for the patients. In this study, the flow-assisted dynamic physical cross-linked coaxial microfluidic three-dimensional (3D) bio-printing technology, combined with the calcium ion chemical dual cross-linking method was developed to design PRP-loaded bioactive multi-layer shell-core fibrous hydrogels. The prepared hydrogels exhibited outstanding water absorption-retention capacity, good biocompatibility as well as a broad-spectrum antibacterial effect. Compared with clinical PRP gel, these bioactive fibrous hydrogels displayed a sustained release of GFs, reducing the administration frequency by 33 % availably during the wound treatment, but more prominent therapeutic effects such as effective reduced inflammation, in addition to promoting the growth of granulation tissue and angiogenesis, the formation of high-density hair follicles, and the generation of regular ordered and high-density collagen fiber network, which suggested great promise as exceptional candidates for treatment of diabetic foot ulcer in clinical settings.

Biomimetic three-layer hierarchical scaffolds for efficient water management and cell recruitment.

Taking inspiration from the structures of roots, stems and leaves of trees in nature, a biomimetic three-layered scaffold was designed for efficient water management and cell recruitment. Using polycaprolactone (PCL) and polyacrylonitrile (PAN) as raw materials, radially oriented nanofiber films and multistage adjustable nanofiber films were prepared through electrospinning technology as the base skin-friendly layer (roots) and middle unidirectional moisture conductive material (stems), the porous polyurethane foam was integrated as the outer moisturizing layer (leaves). Among which, radially oriented nanofiber films could promote the directional migration of fibroblasts and induce cell morphological changes. For the spatially hierarchically nanofiber films, the unidirectional transport of liquid was effectively realized. While the porous polyurethane foam membrane could absorb 9 times its weight in biofluid and retain moisture for up to 10 h. As a result, the biomimetic three-layered scaffolds with different structures can promote wound epithelization and drain biofluid while avoiding wound inflammation caused by excessive biofluid, which is expected to be applied in the field of skin wounds.

Implications of Withaferin A for the metastatic potential and drug resistance in hepatocellular carcinoma cells via Nrf2-mediated EMT and ferroptosis.

Hepatocellular carcinoma (HCC) constitutes a major global health threat due to the high incidence and mortality. Sorafenib is known as the first-line medication for advanced HCC; however, it only extends the limited benefit for HCC patients as the development of acquired resistance. Withaferin A exerts broad pharmaceutical applications in several cancers. However, its effects on HCC cell metastatic potential and sorafenib resistance remain elusive. Here, we corroborated that Withaferin A greatly restrained cell viability, invasion, vasculogenic mimicry (VM) formation, and VE-cadherin levels in HepG2 and SNU449 cells. Moreover, Withaferin A sensitized sorafenib (SR)-resistant HCC cells to sorafenib. In striking contrast to the parental cells, lower ferroptosis was observed in SR-resistant cells as the lower ROS, MDA, and higher intracellular GSH levels in SR-resistant cells. Of interest, Withaferin A enhanced ferroptosis in SR-resistant cells, which was reversed by ferroptosis antagonist liproxstation-1. Notably, Withaferin A elevated Keap1 expression to mitigate Nrf2 signaling activation-mediated epithelial to mesenchymal transition (EMT) and ferroptosis-related protein xCT expression. Importantly, blockage of the Keap1/Nrf2 signaling overturned Withaferin A-evoked ferroptosis and facilitated sorafenib resistance. In addition, knockdown of Keap1 antagonized the inhibitory efficacy of Withaferin A on HCC cell viability, invasion, and VM formation. Consequently, Withaferin A may attenuate the metastatic potential and sorafenib resistance by regulating Keap1/Nrf2-associated EMT and ferroptosis. Thus, Withaferin A may serve as a promising agent for HCC therapy, especially for advanced HCC.

Fomitiporellacrystallina sp. nov. (Basidiomycota, Hymenochaetales) from China.

Background: Fomitiporella is an important genus of wood-decaying fungi. Many new species were revealed in the last five years, based on morphological characters and molecular data. During a study on the taxonomy of Fomitiporella, two specimens from China were investigated, which have morphological characteristics close to Fomitiporella. After morphological examinations and phylogenetic analyses, a new species was confirmed to be a member of the Fomitiporella clade. New information: Fomitiporellacrystallina sp. nov. is described and illustrated as a new species, based on morphological characters and molecular evidence. It has perennial, irregular, pileate basidiocarps, an indistinct subiculum (ultrathin to almost lacking), lack of any kind of setae, has brownish, thick-walled basidiospores and causes a white rot. A molecular study, based on the combined ITS (internal transcribed spacer region) and nrLSU (the large nuclear ribosomal RNA subunit) dataset, supports the new species in Fomitiporella. The differences between the new species and phylogenetically related and morphologically similar species are discussed. A key to species with pileate to effused-reflexed basidiocarps of Fomitiporella is given.

Near-infrared upconversion multimodal nanoparticles for targeted radionuclide therapy of breast cancer lymphatic metastases.

The theranostics of lymph node metastasis has always been one of the major obstacles to defeating breast cancer and an important decisive factor in the prognosis of patients. Herein, we design NaGdF4:Yb,Tm@NaLuF4 upconversion nanoparticles with PEG and anti-HER2 monoclonal antibody (trastuzumab, Herceptin) (NP-mAb), the delivery of NP-mAb through the lymphatic system allows for effective targeting and accumulation in lymphatic metastasis. Combination of radionuclides 68Ga and 177Lu could be chelated by the bisphosphate groups of NP-mAb. The obtained nanoprobe (NP-mAb) and nanonuclear drug (68Ga-NP-mAb or 177Lu-NP-mAb) exhibited excellent stability and show high accumulation and prolong retention in the lymph node metastasis after intratumoral injection into the foot pad by near-infrared fluorescence (NIRF), single-photon emission computed tomography (SPECT) and positron emission tomography (PET) imaging. Utilizing the ß-rays released by 177Lu, 177Lu-NP-mAb could not only decrease the incidence of lymph node metastasis, but also significantly decrease the volumes of lymph node metastasis. Additionally, 177Lu-NP-mAb induce no obvious toxicity to treated mice through blood routine, liver and kidney function assay. Therefore, nanoprobe and nanonuclear drug we designed could be acted as excellent theranostics agents for lymph node metastasis, providing potential alternatives diagnose and treatment option for lymph node metastasis.

Efficient neutron radiation shielding by boron-lithium imidazolate frameworks.

Radiation protective materials are widely applied to avoid occupational hazards from either particle emissions or high-energy electromagnetic waves. Herein, we present a boron imidazolate framework (BIF) as a novel neutron shielding additive with high neutron capture cross-section elements B/Li and H. The BIF1-based epoxy resin matrix (Ep-BIF1) possesses high thermal stability and excellent resistance capacity. The neutron radiation shielding property was characterized using an Am-Be source, in which the thermal neutron shielding efficiency of Ep-BIF1 is notably higher than that of Ep-B4C with equal boron concentration, showing potential applications as an advanced efficient neutron radiation shielding composite.

Preparation of aminated porous polyacrylonitrile nanofibers as adsorbent for methyl orange removal.

In this study, porous electrospinning polyacrylonitrile nanofiber (PPAN) surface functionalization with amine groups is studied for methyl orange (MO) dye removal from aqueous solution. A series of adsorption experiments were carried out to investigate the influence of initial solution pH value, contact time, initial solution concentration, and adsorption temperature on the adsorption performance. The experimental results showed that the removal of MO on these PPAN-PEI and PPAN-TEPA nanofibrous mats was a pH-dependent process with the maximum adsorption capacity at the initial solution pH of 3, and that the PPAN-PEI and PPAN-TEPA nanofibrous mats could be regenerated successfully after 4 recycling processes. The adsorption equilibrium data were all fitted well to the Langmuir isotherm equation, with maximum adsorption capacity of 1414.52 mg g-1 and 1221.09 mg g-1 for PPAN-PEI and PPAN-TEPA, respectively. The kinetic study indicated that the adsorption of MO could be well fitted by the pseudo-second-order equation and Weber-Morris model. Thermodynamic parameters such as free energy, enthalpy, and entropy of adsorption of the MO were also evaluated, and the results showed that the adsorption was a spontaneous exothermic adsorption process.

Single medium-sized hepatocellular carcinoma treated with sequential conventional transarterial chemoembolization (cTACE) and microwave ablation at 4 weeks versus cTACE alone: a propensity score.

BACKGROUND: Microwave ablation (MWA) is a potentially curative treatment for unresectable patients with hepatocellular carcinoma (HCC) ≤ 3 cm, while its therapeutic efficacy decreases significantly for HCC > 3cm. Previous studies have demonstrated that conventional transarterial chemoembolization (cTACE) combined with MWA (cTACE-MWA) may improve local tumor control rate and reduce the recurrence rate for HCC > 3cm. However, there have been few study designs to analyze the clinical efficacy of cTACE-MWA for medium-sized HCC (3-5cm). Therefore, this study aims to compare the clinical efficacy and safety of cTACE-MWA with cTACE alone for a single medium-sized HCC of 3-5 cm in diameter. METHODS: We retrospectively investigate the data of 90 patients with a single medium-sized HCC who were referred to our hospital and underwent cTACE-MWA or cTACE alone from December 2017 to March 2020. Then, patients were identified with propensity score-matched (1:1). The local tumor response to treatment and time to progression (TTP) were compared using mRECIST criteria between the cTACE-MWA group and the cTACE group. RESULTS: A total of 42 patients were included after matching (cTACE-MWA: 21; cTACE: 21). Comparing with cTACE, cTACE-MWA demonstrate significantly better local tumor control (ORR: 95.2% vs 61.9%, p = 0.02; DCR: 95.2% vs 66.7%, p = 0.045) and TTP (median 19.8 months vs 6.8 months, p < 0.001). The 1- and 2-year cumulative probabilities of OS were 100% and 95% in the cTACE-MWA group, which were significantly higher than those in the cTACE group (95% and 76%) (p = 0.032). Multivariate Cox regression analysis illustrates that cTACE-MWA was associated with better TTP (hazard ratio, 0.28; 95% CI: 0.1, 0.76; p = 0.012), but tumor size was associated with worse TTP (hazard ratio, 1.71; 95% CI: 1.01, 2.89; p = 0.045). CONCLUSIONS: cTACE followed by MWA improved TTP and OS in patients with a single medium-sized HCC, and no major complication was observed in this study.

A multifunctional 3D dressing unit based on the core-shell hydrogel microfiber for diabetic foot wound healing.

The healing mechanism of diabetic foot wounds is very complicated, and it is difficult for a single-function medical dressing to achieve good therapeutic effects. We propose a simple coaxial biological 3D printing technology, which uses one-step 3D deposition to continuously produce multifunctional medical dressings on the basis of core-shell hydrogel fibers. These dressings have good biocompatibility, controlled drug-release performance, excellent water absorption and retention, and antibacterial and anti-inflammatory functions. In vivo experiments with type 2 diabetic rats were performed over a 14-day period to compare the performance of the multifunctional 3D dressing with a gauze control; the multifunctional 3D dressing reduced inflammation, effectively increased the post-healing thickness of granulation tissue, and promoted the formation of blood vessels, hair follicles, and highly oriented collagen fiber networks. Therefore, the proposed multifunctional dressing is expected to be suitable for clinical applications for healing diabetic foot wounds.

3D PCL/collagen nanofibrous medical dressing for one-time treatment of diabetic foot ulcers.

Nanofibrous dressings exhibit high specific surface areas, good histocompatibility, enhanced wound healing, and reduced inflammation, which have broad technological implications for treating diabetic foot ulcers (DFUs). However, current nanofibrous dressings still suffer from high resistance to cell infiltration and multiple dressing changes. In this study, polycaprolactone (PCL) and collagen were adopted as electrospinning materials to prepare a 3D PCL/Collagen (PC) nanofibrous dressing (3D-PC) using aqueous phase fibre reassembly technology. The matrix metalloproteinases (MMPs) inhibitor doxycycline hyclate (DCH)-loaded halloysite nanotubes (HNTs) (DCH@HNTs) and antibacterial agent cephalexin (CEX) were loaded onto the dressing to prepare a multifunctional 3D drug-loaded PCL/Collagen nanofibrous dressing to promote DFU wound healing. The obtained 3D nanofibrous dressing exhibited high water absorption capacity and swelling capacity. It showed good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in vitro antibacterial test. In addition, the 3D nanofibrous dressing demonstrated good biocompatibility. It could significantly reduce the frequency of dressing changes and improve the healing of DFU wounds compared with the conventional multiple dressing changes method, suggesting a potential candidate for healing diabetic wounds.

Learning Feature Channel Weighting for Real-Time Visual Tracking.

Recently, the siamese convolutional neural network plays an important role in the field of visual tracking, which can obtain high tracking accuracy and good real-time performance. However, the requirement of offline training a specific neural network results in the hardware source and time consumption. In order to improve the tracking efficiency and save computation resources, we adopt pre-trained densely connected neural network to extract robust target features. Since the pre-trained model is mainly used for classification task, it is not appropriate to directly adopt these deep features for visual tracking. We design a regression network to measure the importance of each channel to the target, and then propose a weighting fusion strategy to select the suitable features for visual tracking. Besides, we provide deep analysis about the proposed channel weighting method to demonstrate the superiority of this method through visualization of feature heatmaps. Extensive experiments on four classical benckmarks show that compared with state-of-the-art methods, our algorithm achieves the best results on several standard indicators and comparable results on other indicators.

Theoretical Derivation and Experimental Study of Liquid Equilibrium Shapes under Different Rotation Modes.

Research shows that the surface shape of rotary liquid depends on the rotation mode. Mode A is that when the container wall rotates the liquid, the rotating liquid surface is paraboloid. Mode B is that when the rotor in the center of the container rotates the liquid, the rotating liquid surface is vortex. Based on the paraboloid formed by the mode A, the identity between the liquid level parameter and the wall slope K (K ≠ 0) is derived. When K → ∞, with the increase of the container angular spin rate, the liquid level parameter changes are infinite, the liquid level change and volume relationship are fixed. When K > 0, the container is a cylinder with a large upper part and a small lower part and the liquid level parameter changes are limited, and the limit ratio between the liquid level parameters is + 1. In addition, through the vortex experiment by the mode B, it is concluded that the vortex curve can be regarded as composed of three parabolas: the center triggering part, the rising part, and the edge attenuation part. Different from the mode A, the liquid level change and volume relationship caused by the vortex formed by the mode B are both variables. According to the experimental results, the influences of container inner diameter, initial liquid level, rotor size, and rotor speed on the vortex characteristics are discussed in detail. At the same time, based on the experiment, the liquid level change and volume relationship caused by the formation of the vortex are deduced under the ideal condition when a stable liquid surface is formed by the vortex.

Global Diversity and Updated Phylogeny of Auricularia (Auriculariales, Basidiomycota).

Auricularia has a worldwide distribution and is very important due to its edibility and medicinal properties. Morphological examinations and multi-gene phylogenetic analyses of 277 samples from 35 countries in Asia, Europe, North and South America, Africa, and Oceania were carried out. Phylogenetic analyses were based on ITS, nLSU, rpb1, and rpb2 sequences using methods of Maximum Likelihood and Bayesian Inference analyses. According to the morphological and/or molecular characters, 37 Auricularia species were identified. Ten new species, A. camposii and A. novozealandica in the A. cornea complex, A. australiana, A. conferta, A. lateralis, A. pilosa and A. sinodelicata in the A. delicata complex, A. africana, A. srilankensis, and A. submesenterica in the A. mesenterica complex, are described. The two known species A. pusio and A. tremellosa, respectively belonging to the A. mesenterica complex and the A. delicata complex, are redefined, while A. angiospermarum, belonging to the A. auricula-judae complex, is validated. The morphological characters, photos, ecological traits, hosts and geographical distributions of those 37 species are outlined and discussed. Morphological differences and phylogenetic relations of species in five Auricularia morphological complexes (the A. auricula-judae, the A. cornea, the A. delicata, the A. fuscosuccinea and the A. mesenterica complexes) are elaborated. Synopsis data on comparisons of species in the five complexes are provided. An identification key for the accepted 37 species is proposed.

Semiconducting polymer nano-radiopharmaceutical for combined radio-photothermal therapy of pancreatic tumor.

BACKGROUND: Pancreatic ductal adenocarcinoma (PDAC) is a devastatingly malignant tumor with a high mortality. However, current strategies to treat PDAC generally have low efficacy and high side-effects, therefore, effective treatment against PDAC remains an urgent need. RESULTS: We report a semiconducting polymer nano-radiopharmaceutical with intrinsic photothermal capability and labeling with therapeutic radioisotope 177Lu (177Lu-SPN-GIP) for combined radio- and photothermal therapy of pancreatic tumor. 177Lu-SPN-GIP endowed good stability at physiological conditions, high cell uptake, and long retention time in tumor site. By virtue of combined radiotherapy (RT) and photothermal therapy (PTT), 177Lu-SPN-GIP exhibited enhanced therapeutic capability to kill cancer cells and xenograft tumor in living mice compared with RT or PTT alone. More importantly, 177Lu-SPN-GIP could suppress the growth of the tumor stem cells and reverse epithelial mesenchymal transition (EMT), which may greatly reduce the occurrence of metastasis. CONCLUSION: Such strategy we developed could improve therapeutic outcomes over traditional RT as it is able to ablate tumor with relatively lower doses of radiopharmaceuticals to reduce its side effects.

Four new species in the Tremellafibulifera complex (Tremellales, Basidiomycota).

Samples of species close to Tremellafibulifera from China and Brazil are studied, and T.fibulifera is confirmed as a species complex including nine species. Five known species (T.cheejenii, T.fibulifera s.s., T. "neofibulifera", T.lloydiae-candidae and T.olens) and four new species (T.australe, T.guangxiensis, T.latispora and T.subfibulifera) in the complex are recognized based on morphological characteristics, molecular evidence, and geographic distribution. Sequences of eight species of the complex were included in the phylogenetic analyses because T.olens lacks molecular data. The phylogenetic analyses were performed by a combined sequence dataset of the internal transcribed spacer (ITS) and the partial nuclear large subunit rDNA (nLSU), and a combined sequence dataset of the ITS, partial nLSU, the small subunit mitochondrial rRNA gene (mtSSU), the translation elongation factor 1-α (TEF1), the largest and second largest subunits of RNA polymerase II (RPB1 and RPB2). The eight species formed eight independent lineages with robust support in phylogenies based on both datasets. Illustrated description of the six species including Tremellafibulifera s.s., T. "neofibulifera" and four new species, and discussions with their related species, are provided. A table of the comparison of the important characteristics of nine species in the T.fibulifera complex and a key to the whitish species in Tremella s.s. are provided.

The Combination of Age, International Standardized Ratio, Albumin and γ-Glutamyl Transpeptidase (AIAG), Tumor Size and Alpha Fetoprotein (AFP) Stage as the Prognostic Model for Hepatitis B-Related Hepatocellular Carcinoma.

BACKGROUND: Advanced liver fibrosis can lead to cirrhosis, portal hypertension and liver failure. Besides, advanced liver fibrosis and cirrhosis are the major risk factors for hepatocellular carcinoma (HCC). Almost all patients with HCC also have liver cirrhosis. This study aims to predict the survival rate of hepatitis B-related hepatocellular carcinoma (HCC) by age, international standardized ratio, albumin and γ-glutamyl transpeptidase (AIAG), an indicator measuring the degree of cirrhosis. METHODS: A total of 501 hepatitis B-related HCC patients experiencing radical surgery were analyzed, retrospectively. General data about demographics and labs were collected at the date of diagnosis to calculate AIAG [age, international standardized ratio (INR), albumin and gamma-glutamyl transferase (GGT)]. The Kaplan-Meier curves and Cox analysis were used to evaluate overall survival (OS) and recurrence-free survival (RFS). The C-index was calculated in R software (version 4.0.3) to evaluate the accuracy of the prognostic model. RESULTS: During a median follow-up period of 30 months, 31.1% (156/501) of the patients died, and 34.3% (172/501) experienced the recurrence of HCC. Compared with patients with lower AIAG score, patients with higher AIAG score had higher Child-Pugh grade and were at higher Barcelona Clinic Liver Cancer (BCLC) stage (both P<0.05). Multivariate analysis suggested that GGT, alpha fetoprotein (AFP), tumor size, BCLC stage and AIAG grade were independent predictors of OS and RFS. Furthermore, the combined use of tumor size, AFP and AIAG stage could predict survival significantly better (C-index=0.710, 95% CI: 0.669-0.751) than BCLC stage. CONCLUSION: AIAG is significantly associated with survival of HCC patients, and provides additional prognostic information for patients with HCC. Our findings suggest that the combination of AIAG, tumor size and AFP stage has a better predictive value for the prognosis of patients with hepatitis B-related hepatocellular carcinoma. However, it is necessary for more external evidences to determine clinical utility.

Microfluidic-directed biomimetic Bulbine torta-like microfibers based on inhomogeneous viscosity rope-coil effect.

Helical structures are attracting increasing attention owing to their unique typical physical and chemical properties. However, it remains a challenge to construct atypical helical structures at the microscale. This paper proposes a continuous spinning method with a microfluidic-chip-based spinning device to engineer atypical helical microfibers. The strategy causes polymer fluid to form the biomimetic Bulbine torta (BT)-like shape with the aid of the inhomogeneous viscosity rope-coil effect. In particular, the structure parameter of the BT microfibers could be optimized through the synchronous regulation of the microfluidic flow and reaction kinetics, and the obtained microfibers exhibit ultrahigh strain sensitivity, indicating great promise as exceptional candidates for constructing ideal strain sensors. In addition, single- and double-hollow BT microfibers are also prepared by introducing the core flow channel into the microfluidic chip and demonstrate high structural similarity to irregular blood vessels (e.g. varicose veins), which is promising for the actual application of blood vessel tissue engineering.